Vaddio HE120 Operating Instructions - Manual (Page 49)

49
Camera menu
Setting the camera menu items
(continued)
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris, Gain, white balance adjustment value
Mode B: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris
Mode C: Pan, Tilt, Zoom (including digital zoom), Focus
Speed With Zoom POS. [Off, On]
“Off” or “On” is set here for the function used to adjust the
pan-tilt adjustment speed in conjunction with the zoom
magnification.
When “On” is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Return
Use this to return to the previous menu.
  Other 2/3 screen
Other 2/3
Focus Mode Auto
Focus ADJ With PTZ. ----
Digital Zoom Disable
Max Digital Zoom x10
Tally Enable Enable
Wireless Control Enable
Return
Focus Mode [Auto, Manual]
“Auto” or “Manual” is set here for the focusing function.
Auto:
The subjects are always brought into focus
automatically.
Manual: The focus is operated manually.
Focus ADJ With PTZ. [Off, On]
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations.
When “Off” is set, adjust the focus as required after
zooming or set the focus to the auto mode.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
Digital Zoom [Disable, Enable]
“Enable” or “Disable” is set here for the digital zoom
function.
If zooming is performed toward the Tele end beyond the
maximum position when “Enable” has been selected, the
digital zoom can be operated continuously. Zooming will
stop temporarily at the position where the optical zoom
and digital zoom are switched so after it has stopped at
this position, proceed with zooming again.
When the setting is changed to “Disable” while already in
the digital zoom region, the zoom will automatically move
to the maximum position of the optical zoom.
  When DRS is enabled, the digital zoom is disabled.
  The digital zoom is set to off when color bars are
displayed during digital zooming.
Notes