Vaddio HE120 Operating Instructions - Manual (Page 54)

54
Camera menu Item Factory setting Selection items
Top Menu Camera Scene Matrix Matrix 4/4 [Color Correction 2/2]
Yl_G Saturation 0 –127 to +127
Yl_G Phase 0 –127 to +127
G Saturation 0 –127 to +127
G Phase 0 –127 to +127
G_Cy Saturation 0 –127 to +127
G_Cy Phase 0 –127 to +127
Cy Saturation 0 –127 to +127
Cy Phase 0 –127 to +127
Cy_B Saturation 0 –127 to +127
Cy_B Phase 0 –127 to +127
B Saturation 0 –127 to +127
B Phase 0 –127 to +127
System Genlock Horizontal Phase 0 –206 to +49
Horizontal Phase Step 1 1 to 10
Output Format 1080/59.94i 1080/59.94p(i), 1080/59.94i, 720/59.94p,
480/59.94p(i), 480/59.94i, 1080/50p(i),
1080/50i, 720/50p, 576/50p(i), 576/50i
Down CONV. Mode Squeeze Squeeze, SideCut, LetterBox
HDMI Color YCbCr422 RGB-NOR, RGB-ENH, YCbCr422,
YCbCr444
Component YPbPr YPbPr, RGB
Frequency 59.94Hz 59.94Hz, 50Hz
Color Bars Setup Off Off, On
Other Other 1/3 Install Position Desktop Desktop, Hanging
Smart Picture Flip Off Off, Auto
Flip Detect Angle ---- 60° to 120°
Preset Speed 30 1 to 30
Preset Scope Mode A Mode A, Mode B, Mode C
Speed With Zoom POS. On Off, On
Other 2/3 Focus Mode Auto Auto, Manual
Focus ADJ With PTZ. ---- Off, On
Digital Zoom Disable Disable, Enable
Max Digital Zoom ---- x2, x3, x4, x5, x6, x7, x8, x9, x10
Tally Enable Enable Disable, Enable
Wireless Control Enable Disable, Enable
Other 3/3 OSD Mix
SDI Out On Off, On
HDMI Out On Off, On
Component Out On Off, On
Video Out On Off, On
OSD Off With Tally Off Off, On
OSD Status Off Off, On
Maintenance Firmware Version CPU Software
Interface Version shipped ----
Camera Main Version shipped ----
Servo Version shipped ----
Network Version shipped ----
EEPROM
Interface Version shipped ----
Camera Main Version shipped ----
FPGA
Frontend Version shipped ----
Backend Version shipped ----
Lens Version shipped ----
IP Network IP Address 192.168.0.10 ----
Subnet Mask 255.255.255.0 ----
Default Gateway 192.168.0.1 ----
Initialize ---- CANCEL CANCEL, OK
Camera menu item table
(continued)