Balboa Water Group Revolution - Manual (Page 69)

Revolution
Transforming the Control of Hot Tubs
69
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,
834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
IT Electrical System (No Neutral)
TN and TT Electrical Services (Line, Neutral, Ground), IT Power Requirements
Single Service [3 wires (line, line, ground)]
230VAC, 50Hz, 1þ, 16A/32A, (Circuit Breaker rating = 20A/40A max.)
Protective Earth Wire (Green/Yellow) must be connected to system ground t
terminal as marked.
All equipment (pumps, blower, and heater) runs on service line L1 with L2 t
acting as the return - 230VAC.
Set the DIP switches according to the wiring diagram so that total system t
current draw never exceeds the rated service input when using a particular
setup.
Three Service [4 wires (line, line, line, ground)]
230VAC, 50Hz, 1þ, 16A/32A, (Circuit Breaker rating = 20A/40A max.)
Protective Earth Wire (Green/Yellow) must be connected to system ground t
terminal as marked.
All equipment (pumps, blower, and heater) runs on service line L1 with L2 t
acting as the return - 230VAC.
Set the DIP switches according to the wiring diagram so that total system t
current draw never exceeds the rated service input when using a particular
setup.
L2
L1
N
GRN
L2
L1
L3
N/A
BRN
BRN
LINE 3 - CAP (INSULATE) END.
DO NOT CONNECT.
BRN
L2
L1
N
GRN
L2
L1
N/A
BRN
BRN