Apollo 150 - Manual (Page 133)

User Manual version 2007
APOLLO 120/150 III
7-123
SIS 630 O
N
C
HIP
PCI D
EVICE
u SIS-7018 AC97 AUDIO
Select Enabled to support AC97 Audio.
The choice: Enabled or Disabled.
u SIS-900 10/100M ETHERNET
This item provides a total communication solution including
10/100Mb Fast Ethernet for Office requirement and 1Mb
HomePNA for Home Networking.
The choice: Enabled or Disabled.
u O NBOARD
FDC C
ONTROLLER
Select Enabled if your system has a floppy disk controller
(FDC) installed on the system board and you wish to use it. If
you install and-in FDC or the system has no floppy drive,
select Disabled in this field.
The choice: Enabled or Disabled.
u O
NBOARD
S
ERIAL
P
ORT
1/P
ORT
2/P
ORT
3/P
ORT
4
Select an address and corresponding interrupt for the first
and second serial ports.
The choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ10, 2E8/IRQ11,
Disabled or Auto.
u UART M ODE
S
ELECT
This item allows you to select UART mode.
The choice: Enabled or Disabled.
u UR2 D UPLEX
M
ODE
This item allows you to select the IR half/full duplex funcion.
The choice: Half or Full.
u O NBOARD
P
ARALLEL
P
ORT
This item allows you to determine access onboard parallel
port controller with which I/O address.
The choice: 3BC/IRQ7, 378/IRQ7, 278/IRQ5, Disabled.