When sending images to av device, P204) – Panasonic DMC-TS5D User Manual
Page 204
- 204 -
Wi-Fi
1
Press [Wi-Fi].
2
Press
3/4/2/1 to select [New Connection], and
then press [MENU/SET].
•
When connecting with the setting you used before, you can select the connection destination
from [History Connection]
3
Press
3/4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4
Press
3/4 to select [AV device], and then press [MENU/SET].
5
Press
3/4 to select [Home] or [External], and then press [MENU/SET].
6
Press
3/4 to select connection method, and then press [MENU/SET].
7
Press
3/4 to select a device you want to connect, and then press [MENU/SET].
•
When the connection is complete, the screen is displayed. To change the send setting, press
[DISP.].
8
Press
3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].
•
To change the setting or disconnect, press [Wi-Fi].
9
When sending images to AV device
Preparations:
When sending a picture to [Home], set your device to DLNA waiting mode.
•
Read the operating instructions of your device for details.
When sending images to [External], the following are required:
•
•
Address number and access number acquired by the destination External AV device.
[Via Network]
When you want to connect to an AV device via a wireless access point.
[Direct]
•
This can be
selected only
when [Home]
is selected.
When you want to directly connect an AV device to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].