Panasonic DMC-TS5D - Manual (Page 125)

- 125 -
GPS/Sensor
When the displayed location name information is different from the current location or when the
positioning is not successful, move to a location where the radio waves from GPS satellites can
be received better and perform the positioning update.
•
When significant time has elapsed since the last successful positioning ([ ], [ ], [ ] and [ ]
are displayed), we recommend performing a positioning update.
Select [Repositioning] on the [GPS/Sensor] menu, and then press [MENU/
SET].
• Positioning is started and the current location information is updated once the positioning is
successful.
∫ Checking the GPS reception status before updating
1 Select [GPS Setting] on the [GPS/Sensor] menu, and then press [MENU/SET].
2 Press 3/4 to select [INFO] and then press [MENU/SET].
• Last updated positioning result is displayed.
3 Press [MENU/SET] in the information confirmation screen.
•
Positioning is started and the current location information is updated once the positioning is
successful.
∫ About automatic updating of positioning
• Even if you do not perform [Repositioning], it will perform the positioning automatically right after this
unit is turned on, and in constant time intervals.
• When [GPS Setting] is set to [ON], the unit will continue to perform the positioning at a constant time
interval even if this unit is turned off. Note that if [Airplane Mode] has been set to [ON], positioning
will not be performed when this unit is turned off.
• Positioning with this unit turned off is canceled in the following cases:
– When the remaining battery power becomes [ ]
– When this unit is not turned on for a specific period of time
Update the GPS information
[ ] Time positioning was performed
[ ] Number of GPS satellites received from
[ ]
Latitude
Longitude