Panasonic DMC-TS5D - Manual (Page 131)

- 131 -
GPS/Sensor
The GPS assist data can be updated by connecting to a wireless access point that is
connected to the internet.
1
Select [Assist Data] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select [Update], and then press [MENU/SET].
3
Press 3/4 to select [Wi-Fi], and then press [MENU/SET].
• The GPS assist data is updated.
• The Wi-Fi connection setting screen will be displayed if the Wi-Fi connection settings have
not been configured. For details on setting the Wi-Fi connection, refer to
P185 .
• The connection used to update GPS assist data with the Wi-Fi function will not remain in [History
Connection] in [Wi-Fi] menu. The connection cannot be registered to [Favorite Connection] either.
The validity period of GPS assist data is 30 days. Using new GPS assist data is recommended.
1
Select [Assist Data] on the [GPS/Sensor] menu, and then press [MENU/
SET].
2
Press 3/4 to select [Expiry Date], and then press [MENU/SET].
• When launching the “GPS Assist Tool” on the PC, the validity period can also be checked on the
screen.
• The start date of the validity period may differ to the date of the update due to the timing of the GPS
assist data update.
Update using the Wi-Fi Function
Check the validity period of the GPS assist data