Select a destination from history, P214) – Panasonic DMC-GH3KBODY User Manual
Page 214
214
Wi-Fi
•
Read the [Help] in the “LUMIX LINK” menu for further details on how to operate.
•
To quit [Remote Shooting], press [Wi-Fi].
•
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject
when you use this function. Use at your own risk.
•
If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync],
perform [Time sync] again.
•
On the smartphone/tablet, you can set the acquisition interval of location information and check
the transfer status of location information. Refer to [Help] in the “LUMIX LINK” menu for details.
•
The smartphone/tablet may fail to acquire location information in China and the border area in
the neighbouring countries of China. (As of October 2012)
•
(When using “LUMIX LINK” for iOS)
If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,
location information recording is stopped.
If you want to make a Wi-Fi connection with the setting you used before, you can select it
from the history, and connect.
•
The number of settings that can be saved in the history is limited. It is recommended that you
save frequently used Wi-Fi connection settings in [Select a destination from Favorite].
•
Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Select a
destination from Favorite].
1
Press [Wi-Fi].
2
Press 3/4 to select [Select a destination from
History], and then press [MENU/SET].
3
Select the desired connection setting with 3/4, and then
press [MENU/SET].
•
To display the connection detail, press [DISP.].
•
To save the selected connection setting in [Select a destination
from History], read steps
3
and
4
of “Registering to favorites”.
[Select a destination from History]
ョㄏヒ
ヸㄊノョㄊ