Panasonic DMC-GH3KBODY User Manual
Page 149
149
Recording
∫
Displaying the MF Assist
•
It is displayed by rotating the focus ring or touching the screen. (In the Creative Control Mode
[Miniature Effect], MF Assistance cannot be displayed by touching the screen)
•
It can also be displayed by pressing [
] to display the setup screen for the enlarged area,
deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].
•
It will switch to the setting screen for the enlarged area by pressing the cursor button when the
[Direct Focus Area] in the [Custom] menu is set to [ON].
∫
Changing the display of the MF Assist
You can switch the magnification factor between approx. 4 times, 5 times and 10 times. In
the case of 4 times magnification, the central region is magnified. In the case of 5 and 10
times magnification, the whole screen is magnified.
•
To change the magnification, rotate the rear dial or touch [
]/[
].
∫
Moving the enlarged area
•
The enlarged area can be moved by dragging the screen
, or pressing the cursor button.
•
The following will return the MF assistance to the original position.
–
When the [Focus Mode] is set to other than [MF]
–
Changing [Aspect Ratio] or [Picture Size]
–
Turning the camera off
–
Pressing [DISP.] when the setting screen for determining the area to be enlarged is displayed.
∫
Closing the MF Assist
•
It will close when the shutter button is pressed halfway.
•
You can also close MF Assist by pressing [MENU/SET] or touching [Exit].
•
When displayed by rotating the focus ring, it is closed approximately 10 seconds after the
operation is stopped.
•
The MF Assist is disabled when using the Digital Zoom or recording motion pictures.
•
MF Assist or MF guide may not display depending on the lens used, but you can display MF
Assist by direct operation of the camera, using the touch screen or a button.
MF ASSIST