Hellenbrand H-125 Series - Manual (Page 3)

3
JOb speCifiCaTiOn sheeT
MODEL NO. __________________________________________________________________________________________
*WATER TEST AT TIME OF INSTALLATION
_______ Hardness CaCo
3
(gpg) ______ Other______________________
_______ Iron (ppm) ______ Other______________________
_______ pH ______ Other______________________
______ Reclamation mode enabled
______ No Hard By-pass enabled
______ Alternator system enabled
OPTIONAL RELAY SETTINGS
_______ Off
Relay 1
_______ On Time
Relay 1 Set Point
_______Start Time, Minutes into Regeneration
Relay 1 Duration
_______Run Time
_______ On Gallons
Relay 1 Set Point
Pulse per _______ Gallons
Relay 1 Duration
_______ Minutes Relay Closed
Relay 1 Set Point
_______ On Regen Gallons
Relay 1 Set Point
Pulse per _______ Gallons
Relay 1 Duration
_______ Minutes Relay Closed
Relay 1 Set Point
*SIZING INFORMATION
All Water is Softened Except:
_______ Rear Hose Bib _______ Front Hose Bib _______ Kitchen Cold
_______ Toilets _______ All Cold
_______ Other ________________________________________________________________________________________
The average family uses 75 gallons per person daily for all water uses in the home, about 50 gallons per person daily if soft water
is not supplied to the toilets, and about 30 gallons per person daily if only hot water is softened.
_______ Daily Water Usage (Gallons/Person)
x _______ Family Size (Number of people in family)
= _______ Total Gallons Per Day
x _______ Grains Per Gallon of Hardness
(Note: Add 3 grains per gallon of hardness for each ppm iron for total compensated hardness)
= _______ Total Grains Per Day
*INSTALLATION DATE _________________________________________________________________________________
*SERIAL NUMBER ____________________________________________________________________________________
NOTES ______________________________________________________________________________________________
Relay 2
_______ On Time
Relay 2 Set Point
_______Start Time, Minutes into Regeneration
Relay 2 Duration
_______Run Time
_______ On Gallons
Relay 2 Set Point
Pulse per _______ Gallons
Relay 2 Duration
_______ Minutes Relay Closed
Relay 2 Set Point
_______ On Regen Gallons
Relay 2 Set Point
Pulse per _______ Gallons
Relay2 Duration
_______ Minutes Relay Closed
Relay 2 Set Point