Hellenbrand H-125 Series - Manual (Page 14)

14
STEP 1VH – Press  and  simultaneously for three seconds and release, then
press  and  simultaneously and release. If screen in step 2VH does not appear
in 5 seconds the lock on the valve is activated.
STEP 2VH – Days, total since start-up: This display shows the total days since
startup. Press the NEXT button to go to Step 3VH. Press REGEN to return to
previous step.
STEP 3VH – Regenerations, total number since start-up: This display shows the
total number of regenerations that have occurred since startup. Press the NEXT
button to go to Step 4VH. Press REGEN to return to previous step.
STEP 4 VH – Volume, total used since start-up: This display shows the total
gallons treated since startup. This display will equal zero if a water meter is not
installed. Press NEXT button to exit Valve History. Press REGEN to return to
previous step.
Use  and  arrows to display sequential error codes.
Step 1VH

valve hisTOrY

Step 2VH 970 TOTAL DAYS
Step 3VH
235

Step 4VH
175

GAL
x1K
(Can not be reset)
TOTAL REGENS
TOTAL GALLONS
RETURN TO ROTATING DISPLAY
1- - -

ERROR LOG