ADTRAN ISU 128 - Manual (Page 122)

61202.029L2-1 ISU 128 User Manual 107
Appendix D
S-Register List
S0 AUTO ANSWER Determines how the ISU 128 answers an
incoming call.
0 = Disable (ISU 128 does not answer call).
1 = Enable (ISU 128 answers all calls).
2 = Dump all calls.
S2 BREAK IN Determines which key or character (in ASCII code)
CHARACTER defines the escape command. The standard escape
character is a + sign (ASCII value of 43 decimal). To
change the character set, set S2 to the desired ASCII value.
Range = 0 to 127
S3 END OF LINE Determines which key or character (in ASCII code)
CHARACTER ends a command line. The standard end-of-line
character is the carriage return (ASCII value of
13 decimal).
Range = 0 to 127
S4 LINE FEED Determines which key or character (in ASCII code)
CHARACTER advances the cursor to the next line after ending a
command line or after an ISU 128 message. The
standard character is the line feed (ASCII value of
10 decimal).
Range = 0 to 127
S5 BACK SPACE Determines which key moves the cursor back one
CHARACTER space to erase a character. The standard character is
the backspace (ASCII value of 8 decimal).
Range = 0 to 127
S7 CONNECT TIME Determines how long the ISU 128 waits for an
outgoing call to be answered.
15 = 15 seconds
30 = 30 seconds
60 = 1 minute
120 = 2 minutes
240 = 4 minutes