Sony PCG-R505ELK - Manual (Page 89)

Removing a Memory Module
To remove a memory module
1. Turn off your computer and disconnect all peripheral devices, such as your printer.
2. Unplug the computer and remove the battery packs.
3. After the computer has cooled, loosen and remove the two screws with the mark located on the bottom
of your computer. Use an appropriate screwdriver.
4. Slide the LCD lock lever and lift the cover. Slide the keyboard toward the LCD display, then lift it away slightly.
5. Lift the keyboard from the LCD display side, then gently turn it over on the touchpad space. Be careful not to
detach the cable when lifting the keyboard.
6. Touch a metal object (such as the connector panel on the back of your computer) to discharge any static
electricity.
7. Slide the memory module out of the slot.
8. Gently replace the keyboard, then press it into your computer. Be careful not to detach the cable when lifting the
keyboard.
9. Close the computer cover, then tighten the screws on the bottom of the computer.
Page 89