Using the system recovery cd(s) – Sony PCG-R505ELK User Manual
Page 156
Using the System Recovery CD(s)
The System Recovery CD(s) enables you to format your hard disk drive and restores all original software applications. Your
computer is returned to the original factory settings.
The System Recovery process removes all software that you may have installed since you started using your
computer. Reinstall any applications that were not included with the computer when you purchased it.
You can use the System Recovery CD(s) to reinstall the operating system and software titles that shipped with your
computer if they become corrupted or are erased. You may not need to reinstall the entire contents of your hard drive. If
you experience a problem with your computer, reinstalling an individual device driver or software title may correct the
problem. Use the Application Recovery CD(s) to reinstall individual applications and to reinstall device drivers. See
for more information.
The System Recovery CD(s) contains a backup copy of all the software originally installed on your hard disk drive. It can be
used only to recover the hard disk of the computer you purchased.
System Recovery options
System Drive Recovery — All data on Drive C is deleted. The factory default settings and software applications are
restored on this drive only.
Change Partition Size — All partitions, custom installations, and changes are removed from the hard disk drive. You
can set the partition sizes for both the Drive C and Drive D. The original, preinstalled operating system and software
applications are restored.
Recovery to Original Factory Defaults — All data and partitions are removed from the hard disk drive. All original
factory settings, operating system, and preinstalled software is restored.
The System Recovery utility does not back up your system's data. If you wish to retain your system data,
perform a backup to an external media.
To use the System Recovery CD(s)
Your system may take a few minutes to load necessary files. A blue screen appears during the downloading process.
1.
Insert the Sony System Recovery CD in the optical disc drive. The System Recovery utility starts from the optical
disc drive. The first CD must be in the drive when your turn on the computer.
2.
Shut down your computer as described in the "Shutting Down Your Computer" section of your supplied Quick
Start.
3.
Wait 30 seconds and turn on your computer.
4.
The VAIO System Recovery Utility dialog box appears. Click Next.
5.
At the pop-up prompt, select Yes to begin the system recovery process. Follow the on-screen instructions.
If your computer does not start from the Recovery CD
1.
Press the power button and hold it for more than four seconds to turn off the computer.
2.
Turn on the computer. When the Sony logo is displayed, press the F2 key. The BIOS setup menu screen
appears.
3.
Press the arrow keys to select the Exit menu.
4.
Press the arrow keys to select "Get Default Values" and then press the Enter key. The message "Load default
values for all SETUP items." appears.
5.
Make sure "Yes" is selected, and press the Enter key.
6.
Press the arrow keys to select "Save and Exit," and press the Enter key. The message "Save configuration
changes and exit now?" appears.
7.
Make sure "Yes" is selected, and press the Enter key. The computer restarts from the Recovery CD.
Page 156