Sony DSC-F717 User Manual
Page 86
86
— Windows XP
Windows XP is set so that the OS AutoPlay
Wizard activates. Follow the procedure
below to cancel the setting.
•
This procedure does not need to be performed
for subsequent image downloads.
a
Click [Start], then click [My
Computer].
b
Right-click [Sony
MemoryStick], then click
[Properties].
c
Cancel the setting.
1
Click [AutoPlay].
2
Set [Content type] to [Pictures].
3
Check [Select an action to perform]
under [Actions], select [Take no
action], then click [Apply].
4
Set [Content type] to [Video files]
and [Mixed content] in step 2, and
repeat step 3.
5
Click [OK].
The [Properties] screen closes.
d
Disconnect and then
reconnect the USB cable
(page 85).
Changing “Image Transfer”
settings
You can change the “Image Transfer”
settings.
Right-click the “Image Transfer” icon in the
tasktray and select [Open Settings], or
select [Settings] when starting up “Image
Transfer”.
•
You can set [Basic], [Copy] and [Delete].
•
If you select [Settings] when starting up “Image
Transfer”, you can only change [Basic].
•
To return to the standard settings, click [Restore
defaults].
Copying images without
using “Image Transfer”
— Windows 98/98SE/2000/Me
If you do not set to launch “Image Transfer”
automatically, you can copy images as
following procedure.
a
Double-click [My Computer],
then double-click [Removable
Disk].
The contents of the “Memory Stick”
inserted in your camera appear.
•
This section describes an example of copying
images to the “My Documents” folder.
•
When the “Removable Disk” icon is not shown,
see the following column.
•
When using Windows XP, see the previous
column.
b
Double-click [DCIM], then
double-click the folder which
contains the desired images.
The folder opens.
c
Drag and drop the image files
into the “My Documents”
folder.
The image files are copied to the “My
Documents” folder.
•
When you try to copy an image to a folder in
which an image with the same file name is
stored, the overwrite confirmation message
appears. When you overwrite the existing
image with the new one, the original file is
deleted.