Sony ICD-SX712D - Manual (Page 64)

64 GB
4
Press v or V on the control button to
adjust the playback tone.
v : Adjusts the sounds by a halftone
higher each time this button is pressed
(from #1 to #6).
V : Adjusts the sound by a halftone lower
each time this button is pressed (from 21
to 26).
The playback tone is set to “0” when you
purchase the IC recorder.
5
Press N /ENT to exit the setting mode.
To resume normal playback
speed and sounds
Slide the DPC(SPEED)/KEY CTRL switch
to “OFF.”
P Note
When the playback speed is in a range from
2.10 times to 3.00 times, the noise cut function
(page 60) and the effect function do not work.
Selecting the sound effect
You can set the effect you want for the
playback in the menu.
1
Select the (Playback) tab t
“Effect” in the menu when the IC
recorder is in the stop or playback mode,
and then press
N /ENT.
The menu items will be different
depending on the model you are using.
Current setting
DPC setting
Key control setting
N /ENT
v , V
x STOP
. , >