Sony ICD-SX712D - Manual (Page 120)

120 GB
and the condition of the batteries. It also
takes more time if the temperature of the
batteries is low, or if the batteries are
charged while you are transferring data to
the IC recorder.
P Notes
• While playing back files using the built-in
speaker, you cannot charge the batteries.
• You cannot charge LR03 (size AAA)
alkaline batteries.
Disconnecting the IC
recorder from the AC outlet
Follow the procedures below; otherwise,
when the IC recorder contains data files, the
files may be damaged or become
unplayable.
1
If you are recording or playing back a
file, press
x STOP to put the IC recorder
into the stop mode.
2
Make sure that the operation indicator of
the IC recorder does not light.
3
Disconnect the IC recorder from the
USB AC adaptor, and then disconnect
the USB AC adaptor from the AC outlet.
P Notes
• During recording (the operation indicator
lights or flashes in red) or accessing data (the
operation indicator flashes in orange),
– the IC recorder should not be connected to
or disconnected from the USB AC adaptor
connected to the AC outlet.
– the USB AC adaptor connected to the IC
recorder should not be connected to or
disconnected from the AC outlet.
Doing so may damage the data. If the IC
recorder is required to process a large
amount of data, the start-up window may be
displayed for an extended period of time.
This is not a malfunction of the IC recorder.
Wait until the start-up display disappears
from the display window.
• While a USB AC adaptor is being used, the
battery indicator does not appear in the
display window.