Sony ICD-SX712D - Manual (Page 55)

55 GB
Oth
e
r R
e
cor
d
in
g
O
p
er
atio
ns
The synchronized recording pauses when
no sound is detected for more than 2
seconds, and “
” begins to flash.
The IC recorder starts recording again as a
new file when sound is detected.
P Notes
• During synchronized recording, you cannot
pause recording (page 24), record with the
pre-recording function (page 43), record
with the VOR function (page 45), record
with the cross-memory recording function
(page 50), and add a track mark (page 76).
• Depending on the piece of equipment
connected to the IC recorder, the
synchronized recording function may not
operate properly due to a difference in the
audio input level.
To record without using the
synchronized recording function
1
Select the (Recording) tab t
“SYNC REC” in the menu, and then
press
N /ENT.
2
Press v or V on the control button to
select “OFF,” and then press N /ENT.
“SYNC REC” is set to “OFF” when you
purchase the IC recorder.
3
Press x STOP to exit the menu mode.
4
Connect other equipment to the IC
recorder when the IC recorder is in the
stop mode.
Connect the audio output connector
(stereo mini-plug) of other equipment to
the m (microphone) jack of the IC
recorder using an audio connecting cable
(page 126).
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 93).
5
Press v or V on the control button to
select “Audio IN,” and then press N /
ENT.