Sony ICD-SX712D - Manual (Page 50)

50 GB
2
Press v or V on the control button to
select “Memory Card,” and then press
N /ENT.
“Select Memory” is set to “Built-In
Memory” when you purchase the IC
recorder.
If the memory card has already been
formatted, proceed to step 5.
3
When the memory card is not formatted,
select the
(IC recorder setting) tab
t “Format” in the menu, and then press
N /ENT.
“Erase All Data?” will be displayed.
4
Press v or V on the control button to
select “Execute,” and then press N /
ENT.
5
Press x STOP to exit the menu mode.
To use the built-in memory
Select “Built-In Memory” in step 2.
To start recording
Select the folder and then press z REC/
PAUSE.
For auto (AGC) recording, see page 22. For
manual recording, see page 39.
Recording across memory
media – cross-memory
recording
When the memory media currently being
used becomes full during recording, the IC
recorder automatically switches its
destination to the other memory media and
continues recording (Cross-memory
recording).
x STOP
N /ENT
v , V