Sony ICD-SX712D - Manual (Page 52)

52 GB
Recording via Other Devices
Recording with an external
microphone
1
Connect an external microphone to the
m
(microphone) jack when the IC
recorder is in the stop mode.
“Select Input” appears in the display
window.
If “Select Input” is not displayed, set it in
the menu (page 93).
2
Press v or V on the control button to
select “MIC IN,” and then press N /
ENT.
“Select Input” is set to “MIC IN” when
you purchase the IC recorder.
3
Press x STOP to exit the menu mode.
4
Press z REC/PAUSE to start recording.
The built-in microphones are
automatically cut off.
If the input level is not strong enough,
adjust the “REC Level” setting on the IC
recorder.
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the IC
recorder.
z Recommended microphones
You can use the Sony ECM-CS10 electret
condenser microphone (not supplied).
v , V
m (microphone) jack
z REC/PAUSE
x STOP
N /ENT
Stereo microphone