Sony ICD-SX712D - Manual (Page 61)

61 GB
Oth
e
r P
la
y
ba
ck
Op
er
atio
ns
When you set the NOISE CUT switch to
“ON,” ambient noise other than the human
voice is reduced. A file is played back with
clear sound quality because the noise of all
frequency bands including a human voice is
reduced.
P Notes
• The effect of the noise cut function may be
different depending on the condition of the
recorded voice.
• When you are using the built-in speaker, the
noise cut function does not work.
• When the NOISE CUT switch is set to
“ON,” the effect function does not work.
To set the noise cut level
1
Select the (Playback) tab t “Noise
Cut Level” in the menu, and then press
N /ENT.
The menu items will be different
depending on the model you are using.
2
Press v or V on the control button to
select “Maximum” or “Medium,” and
then press
N /ENT.
“Noise Cut Level” is set to “Maximum”
when you purchase the IC recorder.
3
Press x STOP to exit the menu mode.
To cancel the noise cut function
Set the NOISE CUT switch to “OFF.”
Adjusting the playback
sound by amplifying
inaudible sound – the digital
voice up function
When you set “V-UP” to “Maximum” or
“Medium,” the low-level part of a recorded
file is amplified, allowing you to hear even
low/small voices more easily.
x STOP
N /ENT
v , V