Sony ICD-SX712D - Manual (Page 44)

44 GB
seconds prior to the point when you press
z REC/PAUSE. This is useful for
recording during interviews or when
making an open-air recording so that you
will not miss an opportunity to start
recording.
1
Select the (Recording) tab t “PRE
REC” in the menu, and then press N /
ENT.
2
Press v or V on the control button to
select “ON,” and then press N /ENT.
“PRE REC” is set to “OFF” when you
purchase the IC recorder.
3
Press x STOP to exit the menu mode.
4
Select a folder.
5
Press and hold z REC/PAUSE.
The IC recorder enters the recording
standby mode.
Pre-recording starts and sounds for a
maximum of the last 5 seconds are
buffered in the memory.
6
To start recording, press z REC/
PAUSE.
The standby for recording mode is
released, and recording continues from
the sound buffered in step 5.
7
To stop recording, press x STOP.
P Notes
• If you start recording with pre-recording
function using the built-in microphones, a
click noise may be recorded when you press
z REC/PAUSE. To record with
pre-recording function, we recommend
using an external microphone.
Press z REC/PAUSE
to enter the recording
standby mode.
Sounds for 5 seconds are
buffered in the memory.
Press z REC/
PAUSE.
Recording
starts.
Displays how long the
sound is buffered in the
memory.