Sony ICD-SX712D - Manual (Page 40)

40 GB
You can check the recording level value
with the peak meter of the display
window. Adjust the level closer to
–12 dB, into a range that is appropriate
for your sound source.
If “ ” is displayed, press . on the
control button to adjust the recording
level down so that “
” is not
displayed, to prevent sound distortion.
Press and hold . or > on the
control button to change the REC Level
value continuously. The sound level is
also displayed as a number right side of
the level meter.
6
Make other settings according to the
state of recording.
If necessary, utilize the “LIMITER”
setting in the menu (page 91).
7
To start recording, press z REC/
PAUSE.
8
To stop recording, press x STOP.
P Notes
• In the manual recording mode, you cannot
record with the VOR function (page 45).
• In the manual recording mode, you cannot
review the current recording, even if you
press
N /ENT.
Adding a recording to a
previously recorded file
OVER indicator
Adjust the maximum
level of the sound to
about –12 dB.
N /ENT
z REC/PAUSE
x STOP
v , V