Asante Technologies FR3000 Series - Manual (Page 31)

User’s Manual 31
Chapter 6. Status Screen
To view a synopsis of the router’s sys-
tem status, log in to the router. The
screen will show the status of the both
WAN connection and all attached pe-
ripherals (if applicable).
From the Status screen, you can see
and do the following:
•
View the status of the router
•
Renew/release IP settings
6.1 Router Status
The following information can be found on the Status screen:
•
IP Address: Refers to the router’s
WAN IP address. This address
should not be confused with the
router’s LAN address (factory de-
fault 192.168.123.254)
•
Subnet Mask: Refers to the router’s
WAN subnet mask (assigned by
your ISP)
•
Gateway: Refers to the router’s WAN gateway IP address (assigned by
your ISP)
•
Domain Name Server: Refers to the router’s primary and secondary WAN
DNS servers
•
Router MAC Address: Refers to the Ethernet address currently in use by
the router
•
Firmware Version: Refers to the current firmware
The status of the routers’ additional peripheral ports will also appear on the
screen, where applicable:
•
Printer (FR3004LC and
FR3002AL models): Information
on your printer connection. Typi-
cal messages may be Ready, Not
ready (printer is off-line), Printing,
or Device error (printer is out of ink or paper). During a print job, you may
click on the Cancel button to manually stop the current print job