Asante Technologies FR3000 Series - Manual (Page 3)

User’s Manual 3
Quick Start Guide
This section will guide you in setting up the Asanté
FriendlyNET router with your Cable/DSL modem. Set-
ting up your router requires three basic steps which
are explained in this Quick Start Guide:
1.
Determine the TCP/IP settings for your specific
computer and record them in the table provided.
2. Set up your hardware.
3. Configure your router.
See Chapters 7 and 8 for details on setting up additional security options and
advanced features.
1. Determine Your TCP/IP Settings
You should already have a working Internet
connection using a Cable/DSL modem. First
you must collect the TCP/IP settings from
your computer and your Internet Service Pro-
vider (ISP). The following sections explain
how to collect your TCP/IP settings for Mac-
intosh, Windows, and Linux platforms:
M AC OS
1. Open your computer’s TCP/IP control panel found under the Apple menu.
2. For Connect via, verify that either Ethernet built-in or the Ethernet adapter
installed in your Mac is chosen.
3. Complete the information in the Your Settings portion of the table below.
Macintosh Configuration Table
Item No. TCP/IP Control Panel Description Your Setting
1 Configure Manually or
Using DHCP Server Static IP Address or
Dynamic IP Address
2 IP Address WAN IP Address
3 Subnet Mask WAN Subnet Mask
4 Router Address WAN Gateway
5 Name Server Address Primary and Secondary DNS
6 Host Name (DHCP Server Only) Client ID No.