Asante Technologies FR3000 Series - Manual (Page 16)

16 Asanté FriendlyNET Cable/DSL Router
Note: If an UPLINK port is not available, simply connect a crossover
Ethernet cable from the router to the switch/hub.
4.
Optional: Insert the wireless adapter card into the PCMCIA slot on the back
of the wireless models (the card is included with the FR3002AL-1PCM and
FR3002AL-2PCM models). Use Asanté AeroLAN wireless adapter cards
ONLY.
5. Optional: Connect a parallel printer cable from your printer to the LPT port
on the router. The FR3004LC and the FR3002AL models can act as a net-
work print server for Macintosh, Windows and UNIX/Linux computers. The
appropriate printer driver must be installed and configured to use the
router’s printer port. See Chapter 10 for more information.
6.
Optional: Connect a straight through modem cable from your dial-up mo-
dem to the router’s COM port (FR3004C/FR3004LC only).
Note: The COM port of the FR3004C/FR3004LC models will support modems
for both Macintosh and PC platforms.