Sony PCG-GRX500K - Manual (Page 218)

VAIO® Notebook Quick Start
218
Troubleshooting the Printer
I cannot print.
❑ Make sure the power to the printer is on, and the printer cable is securely
connected to both the printer and your notebook.
❑ The default setting for the printer port mode is correct for most printers. If
you cannot print, try changing the printer port mode.
1 Click Start on the Windows® taskbar, and then click Settings.
2 Click Control Panel, then Sony Notebook Setup, and select the Printer
tab.
3 Change the printer port mode to bi-directional if it is set to ECP. Change
the printer port mode to ECP if it is set to bi-directional.
❑ Your connected printer may not function after the notebook resumes from a
power saving mode. If this occurs, follow these steps to reset the printer
connection:
1 Click Start, point to Settings, and then select Printers.
2 Right-click the icon of the printer that is not functioning, and then select
Properties to open the Properties window.
3 Click OK to close the Properties window. The printer should now
function properly.