Avaya S8500 - Manual (Page 41)

Using the Avaya Remote Supervisor Adapter
Alerts
Avaya Remote Supervisor Adapter User Guide 41
November 2003
• Factory settings string [default: AT&FO^M]: Type the initalization string to return the modem
to factory settings.
• Auto answer [default: ATSO=3^M]: Type the initialization string to tell the modem to answer
an incoming call after three rings.
• Escape string [default: +++AT^M]: Type the initialization string to return the modem to a
command mode state when the modem is busy.
• Auto answer stop [default: ATSO=O^M]: Type the initialization string to tell the modem to
stop answering the phone when it rings.
• Caller ID string [default: no default]: Type the initialization string that will be used to collect
caller ID information from the incoming call.
• Escape guard [default: 2.5 seconds]: Type the length of time before and after the escape string is
issued to the modem.
2 Click Save to save your changes.
Network interfaces
From the Network Interfaces window, you can:
• Set up an Ethernet connection.
• Set up a PPP over serial port connection.
Configuring an Ethernet connection
To configure an Ethernet connection:
1 In the navigation pane, select Network Interfaces under the ASM Control heading.
The Ethernet window appears (see Figure 17, Network interfaces, on page 41).
Figure 17: Network interfaces