ADTRAN NetVanta 300 Series - Manual (Page 18)

Introduction to the NetVanta Solution NetVanta 300 Series Hardware Installation Guide
18 Copyright © 2006 ADTRAN, Inc. 61200422L1-34D
Features and Specifications
The following table highlights the major features of the NetVanta 300 Series units.
Table 1. Features and Specifications
Protocol Support
Layer 2 protocol: ATM
Routed protocol: IP
Learning bridge functionality
Static routes
RIP Version 1/Version 2
802.1d bridging with spanning tree
LLC-SNAP and VC-MUX (null) encapsulation over AAL5
10/100BaseT RJ-45
ADSL Interface
RJ-11C
NetVanta 340/Netvanta 347 NetVanta 344
Specification Type: Annex A Annex B Annex L Annex A Annex B Annex L
ITU G.992.1 (G.dmt): Yes No N/A Yes Yes N/A
ITU G.992.2 (G.lite): Yes No N/A Yes Yes N/A
ITU G.992.3 (ADSL2): Yes No Yes Yes Yes Yes
ITU G.992.5 (ADSL2+):Yes No N/A Yes Yes N/A
ANSI T1.413 Issue 2
Dynamic rate adaptation
Seamless rate adaptation (NetVanta 344 only)
Bit swapping
Dying gasp
ATM-Specific
Support
AAL5 support for 8 (NetVanta 344) and 16 PVCs (NetVanta 340/NetVanta 347)
RFC2364 support - PPP over AAL5 (LLC and VC multiplexing)
RFC2684 support - Multi-protocol over ATM
PPPoE relay and PPPoE client (RFC2516)
I.610 F4/F5 OAM loopback support
Full support of ATM WAN statistics
Firewall
Stateful inspection firewall
Cyber assault protection
Denial of Service (DoS) protection
DHCP/DNS Support DHCP client, DHCP server, DNS proxy
Management
Familiar Command Line Interface (CLI)
Web configuration interface (HTTP, HTTPS)
Telnet
SNMP
SYSLOG logging
RADIUS authentication
Secure Shell (SSH) management
Policy statistics