Karcher BR 40-25 C Ep EU User Manual
Page 21

– 8
Remove the vacuum bar.
Unscrew the star grips.
Remove the plastic parts.
Remove the vacuum lips.
Insert new vacuum lips.
Insert the plastic parts.
Screw in and tighten the star grips.
Empty the dirty water tank.
Press the appliance down using the
push handle.
Turn the running gear to the front with
your foot.
Push in the brush and remove it down-
wards.
Insert and lock the new roller brush into
place.
Turn the running gear to the rear with
your foot.
Empty the dirty water reservoir.
Press the appliance down using the
push handle.
Turn the running gear to the front with
your foot.
Turn the button for setting the advance
speed in – direction.
Raise the disk brushes.
Turn the disk brushes through approxi-
mately 45°.
Remove the disk brushes downwards.
Insert the new disk brushes in reverse
sequence.
Set the advance speed.
Turn the running gear to the rear with
your foot.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
In case of danger of frost:
Empty the fresh and dirt water reser-
voirs.
Store the appliance in a frost-protected
room.
Maintenance Works
Replacing the vacuum lips
Replacing the roller brushes
Replacing the disk brushes
Maintenance contract
Frost protection
21
EN