Karcher BR 40-25 C Ep EU - Manual (Page 18)

– 5
 Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liq-
uid 60°C.
 Close the cover of the fresh water res-
ervoir.
When the running gear is turned to the
front, the appliance can be pushed to the
place of use without the brushes touching
the floor.

Raise the vacuum bar.
 Press the appliance down using the
push handle.
 Turn the running gear to the front with
your foot.
 Use the push handle to push the appli-
ance to the place of use.
1 OFF
Appliance is out of operation.
2 Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3 Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
4 Vacuuming
Suck in the dirt fleet.
5 Polishing
Polishing the floor without the applica-
tion of liquid.
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.

Release the wing nuts.
 Turn the vacuum bar.
 Tighten the wing nuts.
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.

Release the wing nuts.
 Tilt the vacuum bar.
 Tighten the wing nuts.
Driving to the place of use
Cleaning Programs
1
2
3 4
5
Setting the Vacuum Bar
Oblique position
Inclination
18 EN