elektraLite CP1 User Manual
Page 23
Elektralite
is a division of
Group One Limited
70 Sea Lane Farmingdale
New York 11735 USA
Telephone
+1 516 249 3662
Facsimile
+1 516 249 8870
Web
www.MyElektralite.com
product manual
model nº c p 1
# E_10051a
In a policy of continuous improvement, Elektralite reserve the right to change features,
specifications and prices without notice.
Elektralite™ is a trade mark of Group One Limited
© Group One Limited, 2003
To call macro: press Macro / use keypad to select number / Go. Macro will loop continuously. Go can then be used
to advance to next macro step. “-<” will pause macro, “> +” will continue. Macros ignore the latch feature. Scenes and
chases replace each other with the latest step call.
To edit macro: Editing is the same as chase editing. You can insert and delete steps when the cursor is at the step
number. To save the edited macro you must move the cursor to the macro number and press Enter.
To adjust audio sensitivity: press Enter / Scene / 999 / Enter. Sensitivity is from 0-9 with 9 being the most sensitive (low
audio level from sound board).