elektraLite CP1 - Manual (Page 15)

product manual
model nº c p 1
# E_10051a
Elektralite
SYSTEM PROGRAMMING
There are a number of hidden functions and settings for the CP-1 that are to be programmed during installation that
seldom if ever need to be set again. They are generally used by the installer to customize the system to the particular
application and then left alone. They are all accessed by pressing “Enter”, “Scene”, “99X”, “Enter”, with X being the
number of the particular function. Any selection that involves setting something will be stored in battery backed memory.
Memory Lock
Press “Enter”, “Scene”, “994”, “Enter”. The display will read:
MEMORY LOCK OFF
USE +/-TO SET
Use the” + “ or”-” key to turn memory lock on or off. With memory lock on the scene, chase and macro memory will be
protected from accidental writes from the front panel. If anyone tries to store a scene, chase or macro, the message
“MEMORY LOCKED” will appear in the display.
Save Memory Via MIDI
Press “Enter”, “Scene”, “995”, “Enter”. The display will read:
PRESS GO TO SAVE
MEMORY VIA MIDI
Press “Go” to initiate a memory dump via the MIDI out port. This will encode and send a copy of the scene, chase and
macro memory to a data storage device for backup. Consult the MIDI chapter for more information.
Erase All Memory
Press “Enter”, “Scene”, “996”, “Enter”. The display will read:
DELETE 5 TIMES TO
ERASE MEMORY
Press “Delete” 5 times to erase all scene, chase and macro memory as well as setting all system parameters to their
factory settings. Use this feature with caution.
Set MIDI Channel
Press “Enter”, “Scene”, “997”, “Enter”. The display will read:
MIDI CHANNEL 01
SELECT FROM 1-16
Use the keyswitches to select the MIDI channel (1-16) that the CP-1 will send and receive performance information on.
Consult the MIDI chapter for more information.
Set Instrument Type
Press “Enter”, “Scene”, “998”, “Enter”. The display will read:
INSTRUMENT TYPE
INST 1 GOLD SCAN