Fn1 + command dial, Fn1 guide display, E89) – Nikon P7100 User Manual
Page 215: E 89
E89
The Setup Menu
Re
fere
nce
S
ect
io
n
Fn1 + Command Dial
Set the function to be performed when the command dial is rotated while pressing
the
w1 (FUNC1) button during shooting.
• Rotating either the main command dial or sub-command dial enables the
operation.
B
Note on Fn1 + Command Dial
Operation is disabled when AE or AF is locked (except when recording a movie).
Fn1 Guide Display
Press the
d button M z tab (A13) M Fn1 + command dial
Option
Description
Off (default setting)
Shoot without the function. Operation will be disabled.
Manual focus (
When the focus mode is set to manual focus, the focus can be
adjusted.
Metering (
Change the setting for metering.
Continuous (
Change the settings for continuous shooting.
Flash exp. comp.
(
Change the setting for Flash exp. comp.
Active D-Lighting
(
Change the setting for Active D-Lighting.
Manual flash level
(
Change the flash output set for the built-in flash when the flash
mode is set to manual.
Press the
d button M z tab (A13) M Fn1 guide display
Option
Description
On (default setting)
The
w1 button operation indicator (A8) and the functions
assigned to the Fn1 + shutter button (
E88) and Fn1 +
command dial (
E89) are displayed while the w1 (FUNC1)
button is pressed.
Off
Even if the
w1 button is pressed, guide is not displayed.