Focus, Start recording – Nikon D7100 User Manual
Page 190
162
y
5
Focus.
Frame the opening shot and focus as described in Steps 3
and 4 on pages 153 (for more information on focusing in
movie live view, see page 155). Note that the number of
subjects that can be detected in face-priority AF drops in movie live view.
6
Start recording.
Press the movie-record button to start recording. A
recording indicator and the time available are displayed
in the monitor. Exposure is set using matrix metering and
can be locked by pressing the A AE-L/AF-L button (0 84) or
(in modes P, S, A, and %) altered by up to ±3 EV in steps of
1
/
3
EV by pressing the E button and rotating the main
command dial (0 86). In autofocus mode, focus can be
locked by pressing the shutter-release button halfway.
A
Exposure
The following settings can be adjusted in movie live view:
Aperture
Shutter speed
ISO sensitivity
Exposure compensation
P
, S, A, %
—
—
—
✔
M
—
✔
✔
—
Other shooting
modes
—
—
—
—
In mode M, ISO sensitivity can be set to values between 100 and Hi 2 and shutter speed
to values between
1
/
25
s and
1
/
8000
s (the slowest available shutter speed varies with
the frame rate; 0 169). In other modes, shutter speed and ISO sensitivity are adjusted
automatically. If the result is over- or under-exposed, exit and restart movie live view.
Movie-record button
Recording indicator
Time remaining