Nikon Forestry - Manual (Page 10)

18
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
19
Ru
Se
Nl
Dk
Pl
Hu
Cz
Fi
No
En
De
Fr
Es
It
Ro
* Waterproof models
The Nikon Laser Forestry Pro is waterproof, and will suffer no damage to the optical system if submerged or dropped in water to a
maximum depth of 1 meter for up to 10 minutes.
The Nikon Laser Forestry Pro offers the following advantages:
• Can be used in conditions of high humidity, dust and rain without risk of damage.
• Nitrogen-filled design makes it resistant to condensation and mold.
Observe the following when using the Nikon Laser Forestry Pro.
• The unit should not be operated nor held in running water.
• Any moisture should be wiped off before adjusting movable parts (eyepiece, etc.) of the Nikon Laser Forestry Pro to prevent
damage and for safety reasons.
To keep your Nikon Laser Forestry Pro in excellent condition, Nikon Vision recommends regular servicing by an authorized dealer.
** The battery chamber is water resistant, not waterproof. Water may enter the device if the Nikon Laser Forestry Pro is submerged in
water. If water enters the battery chamber, wipe out any moisture and allow time for the chamber to dry.
Specifications External display
[Power On]
After the power is turned on, the internal
and external LCDs are illuminated until
either the POWER or MODE button is
pressed.
[Power off notice]
If 30 seconds pass without operation,
the power turns off. Approx. one second
before power turns off, this screen is
displayed.
[Results]
1 Point Measurement
After measurement, all data “linear
distance, horizontal distance, height
and angle” are displayed. Units can be
shown in meters, yards or feet. Angles
are indicated by °(degree).
[ m ] : meter
[ YD ] : yards
[ ft ] : feet
Linear distance Horizontal distance
Height Angle Unit
[While measuring]
When the target is upward When the target is downward
[Measurement unsuccessful or unable to measure]
When the target is upward
When the target is downward
With negative values,
the “– (minus)” symbol is not shown.
[Measurement complete]
When the target is upward When the target is downward
Others
Operating temperature
-10° — +50°
Power source CR2 lithium battery x 1 (DC 3V)
Auto power shutoff function equipped (after approx. 30 seconds)
Dimensions (L x H x W) 130x69x45 mm
Weight Approx. 210g (without battery)
Structure Body: Waterproof
(maximum depth of 1 meter for up to 10 minutes)*
（Battery chamber: Water resistant**）
Safety Class 1M Laser product (EN/IEC60825-1:2007)
EMC FCC Part15 SubPartB class B, CE:EMC directive, C-tick, VCCI class B
Environment RoHS, WEEE
Laser
Class
EN/IEC Class 1M
Wavelength 870 nm
Pulse duration 14 ns
Output 15W
Beam divergence Vertical： 25° — 36°, Horizontal： 5° — 8°
Operating humidity 80% RH (without dew condensation)