Spektrum SPM2020 DX2 - Manual (Page 25)

25
The Direct Trim Mode function of the DX2 is accessible through the use of the electronic
throttle or steering trim levers, as well as the two electronic grip levers (A&B) located on
the upper portion of the grip handle. This function allows for quick trim adjustment of these
controls, without the need to access these functions through the four keypad control keys.
To access the Direct Trim Mode function, turn on the transmitter power switch. Next, move
the desired trim lever to be adjusted. The appropriate screen for the selected trim lever will
be displayed. To adjust, simply move the trim lever in the desired direction until the correct
amount of trim is achieved. Once the desired trim is achieved, the screen will return to the
Normal display screen after approximately five seconds from the last trim input. If the
MODE or CHANNEL keys are pressed any time during the five seconds, the system will
return to the previous screen in use.
Accessing the
Direct Trim
Mode
stt
0
tht
0
stg
70
%
SB-TRM
brg
50
SB-TRM
Throttle Trim (Page 27)
Steering Dual Rate (Grip
Lever B (Page 28)
Brake Travel Adjustment (Grip Lever A), Page 29
Steering Trim (Page 26)
–
–
–