Spektrum SPM2020 DX2 - Manual (Page 22)

22
The Steering Rate feature of the DX2 allows the steering servo travel to be increased or
decreased to the desired amount required. The values of the Steering Rate function are a
percentage based from the travel adjust value set in the Travel Adjust section.
Example: Travel adjust value 100%, Steering value 80% — Maximum steering rate is
now reduced to 80% of the maximum travel value (100%)
The Steering Rate function also works in conjunction with the Grip Lever B Steering Rate
function (page 28) and acts as the maximum rate available through Grip Dial B. This feature
allows the steering rate to be increased or decreased directly from the Grip Lever B while
racing to maximize the steering rate needed for the particular track conditions.
Accessing the Steering Rate Function
To access the Steering Rate Function, follow the steps below:
Press the MODE key until D/R STM
appears on the screen MODE CHANNEL
ENTER
SYSTEM
Press the INCREASE or DECREASE
keys to achieve the desired steering
rate value
INCREASE DECREASE
CLEAR
DIRECT
+ –
1. Turn on the transmitter power switch.
2. Press the
MODE key to enter the Function Mode.
3. Press the MODE key until D/R STM appears on the screen.
4. Press the INCREASE or DECREASE keys until the proper steering rate is achieved.
5. Press the MODE key to access the Sub-Trim function.
6. To exit the Function Mode, either turn off the transmitter power switch or press the
MODE and CHANNEL keys at the same time.
Steering Rate
(Function Mode)
stm
100
%
D/R
Indicates Steering Rate function
Indicates current
value
- -
–