Travel adjust, Accessing the travel adjust function, Function mode) (continued) – Spektrum SPM2020 DX2 User Manual

Page 21

Accessing the Travel Adjust Function

To access the Travel Adjust feature, follow the step below:

Press the

MODE key until TRV

ADJ appears on the screen

MODE

CHANNEL

ENTER

SYSTEM

Press the

CHANNEL key to

select the channel to be adjusted
(steering or throttle)

Move the wheel/trigger or Grip
Lever A in the desired direction
and press either the

INCREASE

DECREASE keys to achieve

the desired travel value

INCREASE

DECREASE

CLEAR

DIRECT

–

1. Turn on the transmitter power switch.
2. Press the

MODE key to enter the Function Mode.

3. Press the

MODE key until TRV ADJ appears in small letters on the left side

of the screen.

4. Press the

CHANNEL key to select the desired channel to be adjusted. Steering = STR

(steering right) or STL (steering left); Throttle = FWD (forward) or BRM (braking or

reverse)

5. Move the steering wheel, trigger or Grip Lever A in the desired direction for adjustment

(left/right, forward/reverse or brake). Press the

INCREASE or DECREASE key to

achieve the desired amount of travel. Move the wheel, trigger or Grip Lever A in the

opposite direction to adjust the travel in the opposite direction.

6. Press the

MODE key to access the Steering Dual Rate function.

7. To exit the Function Mode, either turn off the transmitter power switch or press the

MODE and CHANNEL keys at the same time.

Note: When setting the travel adjust values for the steering function, it’s suggested that if

possible the maximum travel values be set to an equal value in both directions to

maintain proper steering control.

Travel Adjust

(Function Mode)

(Continued)