Model select(function mode), Model select (function mode), Model select – Spektrum SPM2020 DX2 User Manual

Page 19: Accessing the model select function, Function mode)

The DX2 has memory for two (2) models. This feature allows for two different models to

be operated with the same transmitter (additional receivers and servos must be purchased

separately), or one model with two (2) different race setups.

Accessing the Model Select Function

To access the Model Select function, follow the steps below:

Press the

MODE key until MDL appears

on the screen

MODE

CHANNEL

ENTER

SYSTEM

Press the

INCREASE or DECREASE

keys to select the desired model to be
used (1 or 2)

INCREASE

DECREASE

CLEAR

DIRECT

–

1. Turn the transmitter power switch on.
2. Press the

MODE key to access the Function Mode.

3. Press the

MODE key until MDL appears on the screen.

4. Press the

INCREASE or DECREASE keys to select the desired model number

(1 or 2).

5. Press the

MODE key to access the Travel Adjust function.

6. To exit the Function Mode, either turn off the transmitter power switch or press the

MODE and CHANNEL keys at the same time.

Model Select

(Function Mode)

md1

Indicates Model Select function

Indicates current
model number

- -