Servo reversing, Accessing the servo reversing function, Function mode) – Spektrum SPM2020 DX2 User Manual

Page 24

The Servo Reversing feature of the DX2 is a very convenient feature when setting up a new

model. The purpose of the servo reversing function is to change the direction of the servo

rotation in relation to the wheel/trigger movement. The Servo Reversing function is available

for the steering and throttle of the DX2.

Accessing the Servo Reversing Function

To access the Servo Reversing function, follow the steps below:

Press the

MODE key until

REV•NORM appears on the
screen

MODE

CHANNEL

ENTER

SYSTEM

Press the

CHANNEL key to

select the desired channel to be
adjusted

ST = Steering
TH = Throttle

Press the

INCREASE or

DECREASE keys to toggle
between REV and NORM

INCREASE

DECREASE

CLEAR

DIRECT

–

1. Turn the transmitter power switch on.
2. Press the

MODE key to access the Function Mode.

3. Press the

MODE key until REV.NORM appears in small letters to the right of the screen.

4. Press the

CHANNEL key to select the channel to be changed

(ST = Steering, TH = Throttle).

5. Press the

INCREASE or DECREASE keys to move the cursor to the desired direction.

6. To exit the Function Mode, either turn off the transmitter power switch or press the

MODE and CHANNEL keys at the same time.

Servo

Reversing

(Function Mode)

REV • NORM

–

Indicates curent channel:
ST = Steering
TH = Throttle

Cursor indicates current servo direction

–