Swiftech MCR80 - Manual

Swiftech Inc., 1703 E. 28 th St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
Page 1 of 2
Packing list
MCR80 radiator 1 80mm fan guard 1
#6 X 7/8” Philips screw type B 8 80x80x15mm fan 2
Nylon washers 4 Double snap grip hose clamp size C 2
*
Note of caution regarding the inlet/outlet side of the radiator:
The fan guard and nylon washers MUST BE INSTALLED when using the provided self-
tapping screws. They are necessary to allow sufficient clearance between the tip of the
screws and the radiator core. Failure to use them will systematically result in permanent
damage to the radiator, as the screws will otherwise punch a hole in the core channels.
Users are advised that such damage is not covered under our warranty.
Likewise, if fans other than the provide 80x80x15mm fans are installed, users should
carefully check the clearance remaining between the retention screws and the radiator
core.