Swiftech MCR X20 DRIVE REV2 User Manual

Mcr “drive” series radiators (rev. 2)

St., Long Beach, CA 90805

– Toll free (US) 888-857-9438 – Tel. (310) 763-0336, Fax (310) 763-7095 - E Mail: [email protected] – URL: http://www.swiftech.com -

Information subject to change without notice

MCR “DRIVE” series

radiators

(Rev. 2)

INSTALLATION GUIDE

MCR220-DRIVE-B

MCR220-DRIVE

MCR320-DRIVE-B

MCR320-DRIVE

One or more patents pending

MCR DRIVE-B versions (without pump) for existing MCP350 or 355 pump owners

MCP350 or MCP355 pump installation

– skip this step if you have the MCR Drive with integrated pump version

Disassemble the MCP350 or MCP355 pump ports housing from the

main motor housing by loosening and removing all 4 screws. Reassemble the
pump body to the MCR drive radiator while making absolutely sure to keep
the existing pump o-ring in place or the assembly will leak! To assemble,
simply align the pump body with the MCR Drive pump housing, and fasten it
with the supplied 8-

32 x ¾” socket screws.

MCR220 and 320 Drive installation

1. Installation of the fittings:

The MCR Drive heat exchangers are shipped with G1/4 x

½” barb fittings (12mm) . Use a 5/8” (16mm) flat wrench or preferably a socket wrench

to fasten the fittings very tight to the radiator body so as to prevent leaks.