Swiftech MCWRAMCOOL User Manual
Swiftech Computer Accessories
Copyright Swiftech 2006 – All rights reserved – Last revision date: 9-30-06 – One or more Patents Pending
Rouchon Industries, Inc., dba Swiftech –3700 Industry Avenue, suite 104, Lakewood, CA 90712 – Toll free (US) 888-857-9438 – Fax 562-
595-8769 - E Mail: [email protected] – URL:
http://www.swiftech.com
- Information subject to change without notice
Thank you for purchasing the MCW Ramcool. This product is intended for expert users. Please consult with a
qualified technician for installation. Improper installation may result in damage to your components. Swiftech™
assumes no liability whatsoever, expressed or implied, for the use of this product, nor its installation. The
following instructions are subject to change without notice. Please visit our web site at
www.swiftnets.com
for
updates.
Compatibility and retention mechanism
Model
6800 to 7950 Geforce
Single adapter
Compatibility
SLi Compatibility
MCW Ramcool/A
All Models ( nVidia reference design)
Except
7950 GX2
7800 GS (AGP)
All
Except
7900GT
7900 GS
MCW Ramcool/79
All models (nVidia reference design)
Except
7950 GX2
7800 GS (AGP)
None
Except
7900GT
7950GT
7900GS
Packing List
Quantity
Parts
Quantity
Parts
1
RamCool waterblock
2
3/8” F fittings
1
Artic Cérmique™ thermal grease
2
¼” F fittings
4
3/8” hose clamps
2
½” F Fittings
8
¼” hose clamps
5
Spring-loaded screws
4
½” hose clamps
1 foot
¼” tubing
Installation Guidelines:
Step-by step
Step 1:
Remove the existing cooling solution from
the RAM & carefully clean off the RAM modules with
an electronics degreaser. Apply the provided Arctic
Céramique™ compound to the RAM modules
Step 2:
Place the Ramcool on the RAM modules.
(As shown above). Turn the graphic card over keeping
in position the water block.
Then
fasten
the
5
screws
(progressively
&
alternatively).