Erformance, Pecifications, Ermanent installation to the chassis – Swiftech H20 80 User Manual
Page 19

Performance & Specifications
Nominal voltage
12 V DC
Operating voltage range
6 to 14 VDC
Nominal power (@ 12 V)
24 W
Nominal current (@ 12 V)
2 amps
Motor type
Brushless, microprocessor
controlled
Maximum head
10 ft (3.1 m)
Maximum discharge
~ 317 GPH (800 LPH)
Connection size
½" barbs
Maximum pressure
50 PSI (3.5 BAR)
Temperature range
32 °F to 140°F (0 °C to 60 °C)
Electrical connector
Molex 4 pin
Weight
1.4 LB (650 gr.)
Impeller Housing material
Noryl®
Our noise measurement (non
lab environment)
33 ~ 34 dBA in a quiet room @ 2'
WARRANTY:
This product is guaranteed for a period of 24 months from date of purchase for defects in material, and workmanship.
Guarantee consists of replacing defective parts with new or reconditioned parts. Guarantee is considered void in case of improper use
(*)(**)(***)
, handling or negligence on the part of user. Original invoice showing date and place of purchase is required for exercise of the
warranty.
(*) WARNING: DO NOT ATTEMPT TO RUN THIS PUMP DRY. THIS WILL CAUSE IMMEDIATE AND PERMANENT DAMAGE TO THE PUMP. (**)
EXCESSIVE WEAR DUE TO INNAPROPRIATE FLUIDS. (***) EXCESSIVE RESTRICTION TO THE PUMP’S INLET
DISCLAIMER:
Swiftech assumes no liability whatsoever, expressed or implied, for the use of this product, and more specifically for any, and all
damages caused by the use of this product to any other devices in a personal computer, whether due to product failure, leak, electrical shorts,
and or electro-magnetic emissions.
5.
Permanent installation to the chassis
Rouchon Industries, Inc., dbA Swiftech™ – 1703 E. 28
th
St, signal Hill, CA 90755, USA – T (562) 595-8009 – F (562) 595-8769 – All content
Copyright Swiftech 2004 – Last edited 9-11-04 – Subject to revision without notice
- 19 of 38 -