Swiftech MCW6000 2 775 - Manual

Parts list
Parts QTY PARTS QTY
MCW6000 or 6002-P™ stepped water-
block 1 S775 hold-down plate & hardware 1
Worm-drive clamps 2 Céramique™ Thermal compound 1
This product is intended for expert users. Please consult with a qualified technician for installation. Improper installation may
result in damage to your components. Swiftech assumes no liability whatsoever, expressed or implied, for the use of these
products, nor their installation. The following instructions are subject to change without notice. Please visit our web site at
www.swiftnets.com for updates.
LGA 775 motherboard
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 socket 775
2 8 FW140X250X0215FB Black fiber washer
3 1 S775-bracket6
4 4 6-32-Acorn-nut
5 1 MCW6000-A MCW6000 "Stepped base"
6 4 6-32X1.5-8 6-32 x 1 5/8" philips screw
7 4 SPRING6 70927compressed-to-0337
8 4 6-32-nut 6-32 nut
9 4 12SWS0444 Nylon should washer
10 4 Lock-washer #6
6
2
2
1 0
8
3
9
7
4
5
1
Hold-down plate
"Short arm" side
over socket lever
CRITICAL:
Water-block
"step side" over
socket lever
DISCHARGE
SPIGOT
INLET
SPIGOT
Figure 1
Copyright Swiftech 2004 – All rights reserved – Last revision date: 10-29-04
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail:
[email protected] – URL: http://www.swiftnets.com - Information subject to change without notice