Swiftech MCW5000 PXR2 User Manual
Page 2
Swiftech Inc., 1703 E. 28
th
St., Signal Hill, CA 90755 T. (562) 595-8009 F. (562) 595-8769
4.
Connecting the water-block(s) to the cooling circuit.
FAQS:
Inlet and outlet are interchangeable.
In Multi-Processor environments, optimal water-block performance will be achieved by connecting them in series (outlet
of one connected to the inlet of the other).
Recommended coolant: distilled water+ algaecides & corrosion inhibitors are mandatory (automotive antifreeze).
5.
Final inspection
Once the installation is completed, it is always a good idea to test the circuit for leaks, prior to powering up the computer.
Troubleshooting help is available on our
, or by calling customer support at 562-595-8009.
Note concerning removal of the tubing
: Push in collet squarely against face of fitting. A tube removal tool is provided with
the MCW5000 block. With the collet firmly held against the face of the fitting, the tube can be safely pulled out. Do not attempt to pull
the tube out without pushing squarely against the collet. This may result in damaging the fitting. Further details for using quick-connect
:
Page 2 of 2