Swiftech MCX4000 User Manual
Page 2
Copyright Swiftech 2002 – All rights reserved – Last revision date: 2-19-2003
Rouchon Industries, Inc., dba Swiftech – 1703 E. 28
th
Street, Signal Hill, CA 90806 – Tel. 562-595-8009 – Fax 562-595-8769
E Mail: Swiftech @swiftnets.com –
Information subject to change without notice
Page1of 2
90MM fan brackets: install the 4 brackets provided with your
hardware package into the 80mm fan mounting holes. Use the
provided 6-32 x 1/4” philips screws to fasten the brackets to the
heatsink, and the black plastic snap rivets to fasten the fan to
the brackets.
III. Final inspection
Now that the heatsink is installed, startup your computer, go into the BIOS and observe the CPU temperature. Under normal ambient
temperature conditions, the processor temperature should never exceed 60 C (140 F). If it does, shut down the computer immediately,
, or by calling customer
support at 562-595-8009.
DISCLAIMER: Swiftech assumes no liability whatsoever, expressed or implied, for the use of these products.