Blodgett SHO-100-G - Manual (Page 15)

13
Installation
electrical connection
Wiring diagrams are located in the control compartment
and on the back of the oven.
This oven is supplied for connection to 115 volt grounded
circuits. The electric motor, indicator lights and related
switches are connected through the 6’ electric supply cord
found at the rear of the oven (115VAC ovens only).
WARninG!!
115vAc oven are equipped with three prong
grounding type plug for your protection
against shock hazard and should be plugged
directly into a properly grounded three prong
receptacle. DO nOt cut or remove the ground-
ing prong from this plug.
The Blodgett Oven Company cannot assume responsi-
bility for loss or damage suffered as a result of improper
installation.
eLectRicAL SPeciFicAtiOnS
Hz volts Phase Amps electrical connection
(minimum size)
60 115 1 6 Cord set provided
60 220-240 1 3 n/a