Blodgett BDO-100-E - Manual (Page 15)

13
Maintenance
troubleshooting Guide
POSSiBLE cAUSE(S) SUGGEStED REMEDY
SYMPtOM: Elements will not heat
• Oven not plugged in.
• Power switch on the control panel is off.
• Control set below ambient temperature.
• Doors are open.
• Plug in electrical supply cord.
• Set the control panel to COOK or OVEN ON.
• Set to desired cook temperature.
• Close doors.
SYMPtOM: Oven does not come to ready.
• The oven has not reached preheat temperature.
• Internal problem with main temperature control.
• Wait for oven to reach preheat temperature.
• *
SYMPtOM: convection fan does not run.
• Oven is not plugged in.
• Circuit breaker tripped.
• Doors are open
• Plug in electrical supply cord.
• Reset the breaker.
• Close doors.
SYMPtOM: General baking problems.
• Thermostat out of calibration.
• Improper oven venting.
• x
• x
*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, how-
ever, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator.
Blodgett cannot assume responsibility for damage as a result of servicing done by unqualified personnel.
WARninG!!
Always disconnect the power supply before cleaning or servicing the oven.